High Flow filtration system are styled on the design of corrosion resistant FRP pressure vessels.
These provide considerable reduction in capital investment versus stainless steel construction and make use of a quick-acting closure.
Each vessel has the convenience of one filter element that can be exchanged in seconds.
▎Features
FRP – GRP housings
- Superior chemical compatibility
- Can withstand higher pressures
- Ideal solution for highly saline water
- Lower weight of individual housings allow ease of handling
High Flow Housing Capability versus Conventional Filter Housings
- Saves time during routine servicing
- Filter sealing risks can be avoided
- Less individual cartridge seal points, reduces chance of fluid bypass
IMP- Replacements & Damages
- Smaller housing minimizes capital expense requirements
- Reduces system footprint
Ease of Use versus conventional Cartridge Filter Housings
- No davit arm or tie rod issues to deal with.
- Easy to set-up by-pass flow connections.
Capacity Scaling
- Additional housings can be added in parallel to scale-up or scale-down the system flow rate. No need to replace the mounting skid.
Adjust System Capacity
- To reduce the number of operating housings in the system, remove a Victaulic clamp and install a blind cap.
Flexible Design Porting
- Ports can be oriented at the installer’s preferred orientation for maximum flexibility. Victaulic grooved ends
- Easy to connect and disconnect with our standard Victaulic style grooved ends
Corrosion-Free Construction
- Totally corrosion-free housings, so critically important in cases of highly saline SWRO plants
▎Specification
| Nominal Diameter | 8″ |
| Length | 20″, 40″, 60″ |
| Material | FRP |
| Inlet & Outlet Orientation | SIDE POTR |
| Inlet/Outlet Size | 3″ |
| Maximum Temperature | 70°C |
| Maximum Pressure | 150psi |
▎Applications
- Desalination Systems Municipal Water Industrial
- SWRO & BWRO System Pre-filtration
- Water
- Process Water / Wastewater & Reclaimed Waters
- Irrigation
- Storage tanks for Landscaping Sprinklers
- Food & Beverage
- Pre-filtration or Polishing Filtration
- Oil & Gas
- Oil/Gas well Injection & Produced Water
- Chemicals & Petrochemicals Automobile Finishing
- Amine Sweetening
- Electronics Manufacturing
- Manufacturing of ICs, Memory Drives
▎Dimensions (mm)
▎Order Information
