83 Series Pleated Filter Cartridges are designed for the filtration of manufacture wetting process in the flat panel display. It has large filtration area and higher flow rate. It can meet the 5-6 gradde line which has requirement of 120L/min flow rate.
Features
- Save the cost, easy to repalce
- Large filtration area and high flow rate and dirt holding capability extend the life time of the filter cartridge and reduce the time of replacing the filter cartridge and shutting down time. It reduce the system cost efficiently.
- Many media type and micron rating options
- According to different filtration requirements it can choose PP/PES/PTFE media. Micron rating is from 0.01um to 50um for options.
- Material is safe and reliable
- All the parts of SemigaTMQF83 Series pleated filter cartridge use high purity of electronic grade PP material. It is thermally welded with media without using any glue and active agent to reduce the risk of filter cartridge precipitation and make sure the filtration safe.
Specifications
| Dimension | |
| Outer Diameter | 83mm |
| Lengths | 10” |
| Material of Constructions | |
| Media | PP, PES, Hydrophobic PTFE, Hydrophilic PTFE |
| Support Layer | PP |
| Cage/Core | Polypropylene |
| End cap | Polypropylene |
| Seal Material Options | EPDM, FKM, E-FKM |
| Operating Limits | |
| Max. Operating Temperature | 80℃ |
| Max. dP (forward) | 4.0 bar @ 20°C 2.4 bar @ 80°C |
Liquid Flow Rate Per 10′
（GPM）Water at 25℃
Order Information
