SCC Series Pleated Filter Cartridges are designed with single piece support of center core and outer cage. The center core, end cap, and filter media are thermally bonded as one unit, which provides additional strength and a positive seal. The pleated filter material provides a large filtration surface area which allows for maximized flow rate and increases the dirt holding capacity.
Features
- Single piece cage and core construction
- High retention structure and particle removal rating from 0.1 to 50 micron
- 100% polypropylene components provide wide chemical compatibility, suitable for various liquid filtration
Applications
- Food & Beverage
- Plating Chemicals
- RO Pre-Filtration
- Fine Chemicals
- Process Water
- Mining
Specifications
| Dimension | |
| Outer Diameter | 66mm, 69mm |
| Length | 20”, 30”, 40” |
| Material of Constructions | |
| Media | PP/GF |
| Support | Polypropylene |
| Core/Cage/End cap | Polypropylene |
| Seal Material Options | Silicone, EPDM, NBR, FKM, E-FKM |
| Performance | |
| Max. Operating Temperature | 80° C (176°F) |
| Max. Operating DP | 4 bar(58psi)@ 20℃(68℉) 1.5 bar(22psi)@ 80℃(176℉) |
| Recommended Change out DP | 2.4 bar(35psi)@ 20℃(68℉) |
Quality
- Filter Cartridges are manufactured in a clean room environ-ment
- Manufactured according to ISO9001:2015 certified Quality Management System
Food Contact Compliance
- Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the
- US Code of Federal Regulations 21CFR
- Passed European Commission Directives (EU10/2011) Halal Certified
Order Information
