PVA Series PVDF Membrane Filter Cartridges are constructed of hydrophilic PVDF membrane and Polypropylene hardware. The single open ended configuration is designed to fit into sanitary housings to ensure effective microbial removal and assembly integrity. Due to the low absorption of the protein, it is especially suitable for the filtration of culture medium, biological agents, vaccines.
Features
- Very low protein adsorption and precipitation
- Easy to wet and integrity test
- High flow rate and longer service life
- 100% integrity tested during manufacture
Applications
- Filtration in the food and beverage industry
- Retention of particles and micro-organisms
- Protein purification
- Cell culture clarification
- Blood filtration
Specifications
| Dimension | |
| Outer Diameter | 69mm (2.72”) |
| Lengths | 5”, 10”, 20”, 30”, 40” |
| Pore Size | 0.1μm,0.22μm,0.45μm,0.65μm |
| Material of Constructions | |
| Media | PVDF |
| Support Layer | Polypropylene |
| Cage/Core | Polypropylene |
| End cap | PSU insert/SS insert |
| Seal Material Options | Silicone, EPDM, FKM |
| Performance | |
| Max. Operating Temperature | 80℃(176℉) |
| Max Operating DP | 4 bar(58psi)@20℃(68℉) 2 bar(29psi)@80℃(176℉) |
| Bacterial Retention 0.22µm | Validated with Brevundimonas diminuta (ATCC 19146) at107/cm2 . |
| SIP | 125℃/30min, 30 cycles |
| Filtration Area Ø 69mm | 0.65 m² per 10” Filter |
| Extractables | 10” Filter Cartridges < 20mg |
Quality Assurance
- Manufacturered in a clean room environment
- Manufactured according to ISO9001:2015 certified Quality Management System
- 100% Integrity Tested
Flow Rate
Order Information
