SAA Series PS Pleated Filter Cartridges are constructed of highly asymmetric hydrophilic polysulfone membranes and polypropylene components. The unique PS membrane delivers a high flow rate, long life time, and excellent particle removal efficiency. All the cartridges are made in a controlled clean room environment. The cartridges are ideally suitable for filtration of water-based fluids.
Features
- Highly asymmetric polysulfone membrane provides excellent dirt holding capacity and flow characteristics
- Hydrophilic polysulfone membrane eliminates the need for prewetting and flushing
- Asymmetric membrane structure provides high flow rates with lower differential pressure and a longer life time
- Widely compatible with cleaning applications in many processes such as developing, etching, and stripping
Applications
- General-Use water Filtration
- Deionized water systems
- Liquid clarification
- Chemical filtration
- Ulta-Pure water systems
Specifications
| Dimension | |
| Outer Diameter | 69mm (2.72”) |
| Lengths | 5”, 10”, 20”, 30”, 40” |
| Material of Constructions | |
| Media | Highly Asymmetric Hydrophilic PS Membrane |
| Support Layer | Polypropylene |
| Cage/End cap/Core | Polypropylene |
| Seal Material Options | EPDM, FKM, E-FKM, Silicone, NBR |
| Removal Efficiency | |
| 0020 | Gas: 0.01μm , Liquid: 0.2μm |
| Operating Limits | |
| Max. Temperature | 80℃(176℉) |
| Max. dP (forward) | 4 bar (58 psi) @ 20°C (68°F) 2 bar (29 psi) @ 80°C (176°F) |
Quality Assurance
- Manufacturered in a clean room environment
- Manufacturered according to ISO9001:2015 certified Quality Management System
- 100% integrity tested
Food Contact Safety
- Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations 21CFR.
Flow Rate
Order Information
